Το Phono Box S3 B είναι ένας phono προενισχυτής εισαγωγικού επιπέδου που προσφέρει πλήρως balanced σχεδίαση σε ένα κομψό και μικρό σασί. Έχουμε εξοπλίσει αυτό το μικροσκοπικό περίβλημα με πλήθος high-end χαρακτηριστικών. Ένα από αυτά είναι η νέα μας True Balanced Connection.

Στην Pro-Ject, οι balanced συνδέσεις ήταν έως τώρα αποκλειστικό προνόμιο της σειράς RS. Το Phono Box S3 Bφέρνει αυτά τα χαρακτηριστικά σε ένα εντυπωσιακά προσιτό νέο επίπεδο εισαγωγής.

THE NEW PHONO BOX S3 B

True High-End For the New Entry-Level

Our Phono Box S3 B comes in complete new casework. The bigger size enabled us to bring a completely new feature set that was never seen before in this price range. The new steel & aluminium case also offers very high rigidity and isolation against outside interferences, which is essential for the new technology inside. Connect up to two turntables simultaneously – all parameters for each input get stored in the memory. You can perfectly match the Phono Box S3 B to a wide variety of cartridges. Use the gain setting to accurately match the output to other sources like CD players or streaming devices. Ultra-low values like 50 pF or 10 ohms allow you to account for all situations.

Balanced By Nature

Cartridges are balanced signal transducers by nature! Due to the internal wiring of MM cartridges, you'll need to upgrade your turntable with an MC cartridge to access the entirety of that balanced signal. Together with our new True Balanced Connection cables you'll be able to access high-end features that were previously only available on the most expensive of phono stages. And the best of all: any Pro-Ject turntable with RCA, miniXLR or 5P outputs can do it!

FULLY DISCRETE AND SYMMETRICAL GAIN STAGE

The new Phono Box S3 B gain stage uses a fully discrete layout. A discrete circuit is composed of disparate electronic components, and individual devices. The amplifier section is built of single parts and doesn‘t use any integrated circuits! That makes for an extended and more costly design process but results in the best sound quality. The fully symmetrical gain stage can optimize the signal-to-noise ratios, feeding the semi-passive, RIAA equalisation stage with a clean signal to work on.

Technical Specifications

Input impedance:

10, 50, 100, 1k, 47k ohms

Input capacitance:

50, 150, 300, 400 pF

Gain (+ 6dB using XLR Out sockets):

40, 45, 60, 65 dB

Signal / Noise ratio MM (40dB):

103dBV, 110dBV - 'A' weighted

Signal / Noise ratio MC (60dB):

85dBV, 90dBV - 'A' weighted

THD at 1 kHz:

<0,001% MM, < 0,005% MC

THD (20Hz-20kHz):

<0,008% MM, < 0,01% MC

RIAA-equalization curve accuracy:

<0,3dB / 20Hz - 20kHz

Subsonic filter:

at 20Hz with 18dB/octave

Input:

1x 5-pin mini XLR / 1x pair RCA phono sockets

Line-level output:

1x pair RCA, 1x pair XLR

Power supply DC:

18V/500mA

Power consumption:

18V/170mA DC, <0.5 W in standby

Dimensions:

206 x 55 x 153 (164 with sockets) mm (W x H x D)

Weight:

930g without power supply

• Supplier Code : 978 29283
• Manufacturer : Pro_ject