Hyper Achromatic Tonearm uses an OCC (Ohno Continous Casting) high purity copper conductor with foamed FEP dielectric, combining to offer a sophisticated, evenly balanced sound which draws you into the musical performance.
The cable iis fitted with our Achromatic non-magnetic RCA plugs and spade-terminated earth tags. The low-mass Achromatic connector features a solder-free, cold-weld connection, all optimised to create a coherent, continuous signal path. The signal conductor is a fully shielded high quality OCC copper, designed and constructed to provide maximum resistance to RFI (Radio Frequency Interference) which can add unwanted noise levels in a poorly shielded cable – particularly vital with the very low-level signals typically generated by a pick-up cartridge.
Hyper Achromatic Tonearm uses an OCC (Ohno Continous Casting) high purity copper conductor with foamed FEP dielectric, combining to offer a sophisticated, evenly balanced sound which draws you into the musical performance.
The cable iis fitted with our Achromatic non-magnetic RCA plugs and spade-terminated earth tags. The low-mass Achromatic connector features a solder-free, cold-weld connection, all optimised to create a coherent, continuous signal path. The signal conductor is a fully shielded high quality OCC copper, designed and constructed to provide maximum resistance to RFI (Radio Frequency Interference) which can add unwanted noise levels in a poorly shielded cable – particularly vital with the very low-level signals typically generated by a pick-up cartridge.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
The Mavros Tonearm Ultra RCA uses the very highest quality ‘6N’ (99.99997% purity) copper manufactured using the OCC ‘Ohno Continuous Cast’ technique combined with a foamed PEF dielectric covered by a discrete continuous copper/Mylar™ electrostatic screen with copper shielding braid for each channel.
The cable assembly demonstrates our custoary focus on minimising breaks and offering maximum continuity in the signal path.
In practice, this means key components in the signal path are OCC copper throughout, including the signal pins at each end of the cable. Termination is with ourlow-mass, high bandwidth, cold-weld Ultra RCA connectors. This approach, rather than the more typical combination of different metals and variable elements in soldered connections, minimises the information losses which occur at different ‘break points.’
The cable is supplied with a separate ground cable with spade earth tags.
SKU: 51476
Upon Order
€869,00
Follow us and be the first to know about the best offers
our social media
Cookie policy
We use cookies to ensure the proper functioning of our website and to provide you with the best browsing experience.
Settings
We use data through cookies for the proper functioning of the website , as well as information that helps us to provide the maximum of our services, but you will decide about this data.
The lack of cookies of this category affects the functioning of the website to a great extent. Without them, functions such as logging in, online shopping or online payments are not possible.
These cookies store anonymous information about the user's behaviour when navigating the website, usage statistics, performance statistics, etc. Their purpose is to improve the functionality of the website & your experience.
They are used to select and display advertisements - only ours - tailored to the user's interests.
