Enjoy the pure analog sound of Astell&Kern with AK PA10's Current / Gain / Crossfeed options for digital audio players and source devices.

• Application of Class-A AMP
• Class-A Current Control (High / Mid / Low)
• Gain Control (High Gain / Low Gain)
• 4.4mm True Balanced input/output support
• 3.5mm Unbalanced input/output support
• Hardware crossfeed support
• Unique SLOPE design of Astell&Kern
• Up to 12 hrs of play time
• Power and Battery Indicator
• C-Type USB charger

Distortion-free Analog Sound of Class-A AMP

Class-A AMPs offer the best linear output, providing soft, warm, and natural sounds by amplifying signals without distortions or defect. This characteristic makes it the most sought-after amplification method by music lovers, though it is considered impossible for portable audio devices as it requires high power consumption and design that is difficult to be realized for small devices.

AK PA10 integrates an Class-A AMP based on the unique circuit design technology of Astell&Kern, offering signature analog sounds.

With a unique circuit design from Astell&Kern that reduces power consumption and increases output while removing noise, AK PA10 is specifically designed to deliver the amazing sounds of an Class-A AMP anywhere and at any time.

AK PA10, the first portable Class-A AMP of Astell&Kern is here so that you can enjoy analog sounds through your portable devices.

Class-A Current Control – Intense and Spatial Sound of Analog AMP

Headphone AMPs are not just designed to get the output required to operate headphones.

AK PA10 controls current to suit different headphones and IEMs reproducing a more intensive and spatial sound.

AK PA10 offers a three-stage control of Class-A AMP current, emphasizing the characteristic of Class-A AMP relative to the current value and creating a more intense sound.

Also, we addressed the concern of battery drain due to power consumption, the major reason why Class-A AMPs are not used for portable devices, by controlling the current value.

You can create sounds that suit the characteristics of headphones and IEMs through the three-stage current control option.

We hope you enjoy the textured and spatial sounds that AK PA10’s Class-A AMP can create.

Vivid Sound Output of Gain Control

Sufficient AMP output is required to extract all the subtle nuances in music when played back through varying headphones and IEMs.

When connected to the balanced input, AK PA10 can support up to 6.2 Vrms output at high gain.

Choose the gain level that offers the best sound of the headphone and IEM that you use to enjoy crystal-clear sounds.

AK PA10 brings out the full potential that your audio device has to offer.

Specifications

• Color
•   Grey
• Crosstalk
• [Low Gain] -83dB @ 1kHz Unbalanced / -110dB @ 1kHz Balanced, [High Gain] -83dB @ 1kHz Unbalanced / -110dB @ 1kHz Balanced
• Total Harmonic Distortion (THD)
• [Low Gain] 0.0045% @1kHz, Unbalanced / 0.0015% @1kHz, Balanced, [High Gain] 0.0027% @1kHz, Unbalanced / 0.0013% @1kHz, Balanced
• Signal to noise ratio
• [Low Gain] 111dB @ 1kHz, Unbalanced / 115dB @ 1kHz, Balanced, [High Gain] 114dB @ 1kHz, Unbalanced / 117dB @ 1kHz, Balanced
• Output Impedance
• 3.5mm (1.1ohm) / 4.4mm(1.3ohm)
• Material
• Aluminum & Silicone
• Battery Life
• 4,200mAh 3.8V Li-Polymer, about 12hours (Unbalanced / Input - 1Vrms / Low Gain / Volume 30%)
• Frequency Range
• [Low Gain] ±0.2dB (Condition : 20Hz~20kHz) Unbalanced / ±0.2dB (Condition : 20Hz~20kHz) Balanced, [High Gain] ±0.06dB (Condition : 20Hz~20kHz) Unbalanced / ±0.06dB (Condition : 20Hz~20kHz) Balanced
• Battery Life
• 4,200mAh 3.8V Li-Polymer
• Connectivity Inputs
• Unbalanced 3.5mm / Balanced 4.4mm
• Connectivity Outputs
• Unbalanced 3.5mm / Balanced 4.4mm
• Frequency Response
• [Low Gain] ±0.2dB (Condition : 20Hz~20kHz) Unbalanced / ±0.2dB (Condition : 20Hz~20kHz) Balanced [High Gain] ±0.06dB (Condition : 20Hz~20kHz) Unbalanced / ±0.06dB (Condition : 20Hz~20kHz) Balanced

• Manufacturer : Astell&Kern
• Supplier Code : ANK-00029